High Density Foam. « eFoam forum

High Density Foam.

(4 posts) (2 voices)

SilencerProductionInc
Member

I was thinking of creating some guitar hero drum silencers (you may have seen them being sold on ebay)

I have been told to get some high density foam and earlier this week ordered some upholstery foam off Ebay.

This worked great and deadend the sound nearly completely, the only problem i had is the stregnth of the foam.

The foam was roughly 5mm thick and i dont know which density it was.

If anyone has any ideas for a stronger foam that does the same job and is of the same desnsity as upholstery foam, it would be much appreciated for a reply.

Thanks alot, Greg.

Posted 11 months ago #
natalie101
Member

I had a similar requirement and the guys at efoam suggested I use computer mouse mat.
As this is cheap thin and made of closed cell foam. Hope this helps. Nat

Posted 11 months ago #
SilencerProductionInc
Member

Thanks Nat.

Do you know if it is possible to get just the foam and not that actual plastic layer on top?

Thanks, Greg.

Posted 11 months ago #
natalie101
Member

As a alternative you can buy a EVA Sheet Foam 2m x 1m x 5mm for £20.00 from efoam
http://www.efoam.co.uk/contact.html
Nat

Posted 11 months ago #

You must log in to post.